E10
Bosch Dryer
Severity: ModerateWhat Does This Error Mean?
Error E10 means the dryer door is not fully closed, or the door latch mechanism has a fault. The dryer cannot run if it cannot confirm the door is securely shut — this is a safety feature. Most E10 errors clear by firmly pushing the door shut — if not, the latch or door switch may need replacement.
Affected Models
- Bosch WTW87565GB
- Bosch WTH84000GB
- Bosch WQB145B0GB
- Bosch WTW876H0GB
- Bosch Serie 8 Heat Pump Dryer
Common Causes
- Door was not pushed firmly enough and did not click into the latch
- Clothing item is caught in the door seal, preventing full closure
- Door latch hook is broken or worn and no longer catches the strike
- Door switch is faulty and not signalling that the door is closed
- Door hinge is misaligned, causing the latch to miss the strike plate
How to Fix It
-
Open the dryer door, check for any clothing caught in the door seal, then push the door firmly closed until it clicks.
A distinct click means the latch has engaged — no click means the latch is not catching.
-
Inspect the door seal all the way around for damage, warping, or debris preventing a full seal.
A damaged door seal can prevent the door from closing flush enough to engage the latch.
-
Look at the door latch hook (on the door edge) and the latch strike (on the dryer body) for visible damage.
A cracked or bent latch hook will not catch the strike — it will need replacement.
-
Test the door switch by pressing the switch plunger manually while monitoring whether the dryer responds.
If pressing the switch plunger with a pen allows the dryer to start, the door latch is not reaching the switch — latch replacement is needed.
-
Check if the door sits flush with the front panel — a misaligned hinge causes the latch to miss the strike.
If the door appears drooping or offset, the hinge may need adjustment or the hinge pin may have worn.
-
Replace the door latch assembly if it is visibly damaged or fails the above tests.
Order the part using the full Bosch model number from the rating plate inside the door frame.
When to Call a Professional
Contact a technician if E10 persists after the door is confirmed to be fully closed. Door latch and switch replacement is a straightforward repair costing $50–$150. If the door hinge is bent or broken, a technician will need to assess whether the door assembly needs replacement.
Frequently Asked Questions
Why does my Bosch dryer show E10 when the door looks closed?
The door may appear closed but the latch hook is not fully engaging the strike plate. A worn latch hook loses its grip and the door can appear shut while the switch registers it as open. Inspecting the latch hook closely (sometimes with a torch) usually reveals the wear.
Can I fix the Bosch dryer door latch myself?
Yes — door latch replacement is one of the more DIY-friendly dryer repairs. The latch assembly typically clips or screws into the door edge and takes about 15–30 minutes to swap. Always unplug the dryer before doing any repairs.
How much does a Bosch dryer door latch cost?
The door latch assembly typically costs £20–£60 depending on the Bosch model. Fit it yourself for no additional cost, or add £80–£150 for a technician visit. Always use the full model number from the rating plate to ensure you order the correct latch part.