Maytag Dryer Error Code F06 — What It Means & How to Fix It

What Does This Error Mean?

F06 means the motor speed sensor in your Maytag dryer is not reporting correctly. The dryer monitors drum speed to make sure it spins at the right rate. If the signal is missing or wrong, the dryer stops to prevent damage.

Affected Models

Maytag MEDB835DW
Maytag MEDC215EW
Maytag MED5500FW
Maytag Bravos Dryer

Common Causes

Drive motor speed sensor has failed
Wiring to the motor sensor is loose, broken, or corroded
Drive belt is worn, slipping, or broken — causing irregular motor speed
Motor is struggling due to a heavy or wet load
Control board fault affecting how it reads the motor signal

How to Fix It

Stop the dryer and press Power to cancel the cycle.

Do not force the dryer to keep running if it is reporting a motor error.
Unplug the dryer for 5 minutes.

A power reset may clear a temporary speed sensor glitch.
Check that the load is not too heavy or still soaking wet.

A very wet load adds extra resistance that can strain the motor and trigger speed errors.
Plug the dryer back in and start a small, lightly damp load.

If F06 does not reappear, the previous load may have been the issue.
If F06 returns with a normal load, call a technician.

A worn drive belt or failed speed sensor needs professional repair.

When to Call a Professional

Motor components require a technician to diagnose safely. A broken belt or failed sensor will need professional repair to get the dryer running again.

Frequently Asked Questions

What is the drive belt and how do I know if it is broken?

The drive belt wraps around the drum and motor pulley to spin the drum. If the drum does not spin at all when you start the dryer, the belt is likely broken.

Can a heavy wet load damage the motor?

Running consistently heavy or soaking-wet loads puts abnormal stress on the motor over time. Spin clothes in the washer first before transferring to the dryer.

How much does a drive belt replacement cost?

The belt itself is usually $10 to $30. With a technician's labor, expect $100 to $200 for the full repair.