Fuzzy / Blurry Picture
Infant Optics Baby Monitor
Severity: MinorWhat Does This Error Mean?
A fuzzy or blurry picture on the Infant Optics DXR-8 is usually caused by a dirty lens, wrong lens selection, or the camera being too close to the crib. Clean the lens and adjust the camera position.
Affected Models
- Infant Optics DXR-8
- Infant Optics DXR-8 Pro
Common Causes
- Camera lens is dirty or has fingerprints
- Wrong interchangeable lens installed for the distance
- Camera too close to the subject (minimum focus distance)
- Night vision IR LEDs reflecting off nearby surfaces
- Parent unit screen dirty
How to Fix It
-
Clean the camera lens with a soft dry cloth.
Fingerprints and dust on the lens cause blurriness. Gently wipe the lens — do not use liquid cleaners.
-
Check which lens is installed.
The DXR-8 comes with a normal lens. The optional wide-angle lens and zoom lens have different focus ranges. Use the normal lens for typical crib-to-wall distances (3-6 feet).
-
Move the camera further from the crib.
If the camera is too close, it cannot focus properly. Place it at least 3 feet from the baby.
-
Clean the parent unit screen.
Sometimes the blurriness is on the screen, not the camera. Wipe the parent unit display with a soft cloth.
Frequently Asked Questions
What lenses are available for the DXR-8?
The DXR-8 has interchangeable lenses: - Normal lens (included): best for typical room setups - Wide-angle lens (optional): covers more of the room - Zoom lens (optional): for seeing more detail from further away
Is the picture quality HD?
The DXR-8 is not HD — it uses a lower resolution optimised for low-light performance and battery life. The DXR-8 Pro has improved resolution.