No Power
Nextbase Dash Cam
Severity: CriticalWhat Does This Error Mean?
Nextbase dash cam no power is usually caused by a faulty 12V cigarette lighter socket, a blown fuse in the power cable, or a loose connection. Test the socket with another device and check the fuse inside the power cable plug.
How to Fix It
-
Test the cigarette lighter socket
-
Check the fuse in the Nextbase power cable
-
Check the car fuse box
-
Try a different power cable
-
Check the connection at the dash cam
-
Test the dash cam with a USB power bank
Frequently Asked Questions
Nextbase dash cam turns on when engine starts but turns off after a few minutes?
This points to a faulty cigarette lighter socket that only provides power when the ignition is active, combined with a power cut after a set time. Check whether the socket is fully accessory-powered or timed. Try a different socket.
Nextbase dash cam hardwired but no power — what to check?
Check the hardwire kit fuse (usually in a small inline fuse holder on the hardwire cable). Also confirm the circuit the hardwire was connected to is active. The hardwire kit should be connected to a fused accessory circuit in the fuse box.
Nextbase dash cam flickers on and off while driving — loose connection?
Intermittent power is most often caused by a loose cable connection at the camera or at the cigarette lighter socket. Check both ends of the cable and ensure the socket provides a stable voltage.