Error 18
Xiaomi Electric Scooter
Severity: CriticalWhat Does This Error Mean?
Error 18 means the motor's Hall effect sensor has failed or is giving incorrect readings. The controller cannot determine the motor's position. The motor or its internal sensor may need replacement.
Affected Models
- Xiaomi Mi Electric Scooter Pro 2
- Xiaomi Mi Electric Scooter 3
- Xiaomi Mi Electric Scooter 4
Common Causes
- Hall sensor inside the motor failed
- Motor cable connector loose or corroded
- Water ingress into the motor
- Motor winding damage
- Controller board fault
How to Fix It
-
Turn off the scooter, wait 30 seconds, restart.
A temporary glitch can sometimes be cleared.
-
Check the motor cable connection at the controller.
The motor connects to the controller via a multi-pin connector under the deck. Make sure it is clean and fully seated.
-
Check for water damage.
If the scooter was ridden in heavy rain or through puddles, water may have entered the motor. Let it dry completely before trying again.
-
If the error persists: the motor likely needs replacement.
Hall sensor replacement requires motor disassembly. A complete motor replacement is often easier ($50-$100).
Frequently Asked Questions
What is a Hall sensor?
Hall sensors detect the motor's rotor position using magnetic fields. The controller needs this information to drive the motor efficiently.
Can I still ride with Error 18?
The scooter will likely not run at all with Error 18, or may run erratically. Do not attempt to ride.