GE Oven Not Heating — How to Fix

What Does This Error Mean?

A GE oven that won't heat usually has a burned-out bake element, a blown thermal fuse, or a faulty temperature sensor. Start by checking the circuit breaker and visually inspecting the bake element for damage.

Affected Models

GE Electric Range
GE Gas Range
GE Profile Range
GE Café Range
GE JB Series

Common Causes

Failed bake element (most common on electric GE ovens)
Blown oven thermal fuse
Faulty temperature sensor preventing heating cycle from starting
Tripped circuit breaker on 240V supply
Failed igniter or gas valve (gas models)

How to Fix It

Check the circuit breaker.

Electric ovens run on 240V — a half-tripped breaker powers the clock and display but not the heating element. Locate the oven's dedicated breaker, turn it fully off, then back on.
Inspect the bake element visually.

Look at the coiled bake element at the bottom of the oven with the oven off and cool. Visible cracks, blisters, or a hole confirm a burned-out element — replace it. Elements cost $20–$60 for most GE models.
Test the bake element with a multimeter.

Disconnect the element wire terminals and test for continuity. An open circuit reading means the element has burned out internally, even without visible damage.
Test the oven temperature sensor.

A failed sensor (open circuit at room temperature) tells the control board the oven is already hot, so no heat is requested. Test at room temperature — should read ~1,000 ohms. Replace if faulty.

When to Call a Professional

If the element, thermal fuse, and sensor test correctly, the issue is with the control board or wiring. A technician can trace the circuit with a wiring diagram and identify the fault efficiently.

No Heat