E-95
Epson Printer
Severity: ModerateWhat Does This Error Mean?
Epson error E-95 means the printer could not complete its Wi-Fi connection setup. This is a wireless network configuration error that appears during the initial setup or when reconnecting. The fix usually involves re-running the wireless setup with the correct network credentials.
Affected Models
- Epson EcoTank ET-2720
- Epson EcoTank ET-4760
- Epson WorkForce WF-2850
- Epson WorkForce WF-2860
- Epson Expression Home XP-4100
Common Causes
- The Wi-Fi password entered during setup was incorrect
- The printer is trying to connect to a 5 GHz network, but many Epson printers only support 2.4 GHz
- The router is set to WPA3 security, which some older Epson models do not support
- The router's MAC address filtering is enabled and the printer's MAC address has not been added
- The Wi-Fi signal is too weak at the printer's location to complete the setup process
How to Fix It
-
Restart the Wi-Fi setup process on the printer. On the printer's control panel, navigate to Settings > Wi-Fi Setup > Wi-Fi Setup Wizard and follow the prompts.
Re-entering the Wi-Fi password is the most common fix — passwords are case-sensitive, so type carefully.
-
Make sure you are connecting to your 2.4 GHz network, not the 5 GHz one. Most Epson printers only work on 2.4 GHz Wi-Fi.
Your 2.4 GHz and 5 GHz networks usually have different names (SSIDs). Look for the one without a 5G label.
-
Temporarily move the printer closer to the router during setup. Once connected, you can move it back to its normal location.
Signal strength during the initial handshake is critical. A weak signal can abort the setup process.
-
Check if your router has MAC address filtering enabled. If it does, find the printer's MAC address (printed on its label or in the network settings) and add it to the router's allowed list.
MAC filtering blocks any device not explicitly on the list. It is a security feature that home users rarely need.
-
Try using WPS (Wi-Fi Protected Setup) instead of entering the password manually. Press the WPS button on your router, then go to the printer's Settings > Wi-Fi Setup > WPS Push Button Setup.
WPS connects automatically without typing a password. It works if your router has a WPS button (most do).
When to Call a Professional
Error E-95 is a Wi-Fi setup issue and does not require hardware repair. If you cannot complete the wireless setup after trying all steps, contact Epson Support at 1-800-463-7766 or visit epson.com/support for remote setup assistance.
Frequently Asked Questions
How do I tell which Wi-Fi band my network uses?
Check your router's settings or the network names visible on your phone. If you see two networks with similar names (like HomeNetwork and HomeNetwork-5G), the one without 5G is your 2.4 GHz network. If your router broadcasts a single network name for both bands (band steering), it automatically assigns the appropriate band — check your router settings to confirm.
What is WPS and is it safe to use?
WPS (Wi-Fi Protected Setup) is a quick way to connect devices to Wi-Fi by pressing a button instead of entering a password. For home networks it is safe for temporary use, though security researchers have noted some vulnerabilities in older WPS implementations. For short-term setup of a printer it poses minimal risk.
After setup, how do I confirm the printer is connected to Wi-Fi?
On the printer, look for a solid Wi-Fi indicator light on the control panel (not flashing). You can also go to Settings > Wi-Fi Setup > Check Wi-Fi Connection to see the connection status and signal strength. From your computer, try printing a test page to confirm the connection is working end-to-end.