Frigidaire Refrigerator H1 Error — Fix

What Does This Error Mean?

Frigidaire fridge H1 error means the freezer temperature has risen above a safe limit. Press any button to silence the alarm, then check the cause — open door, large warm food load, power outage, or a genuine cooling fault.

Affected Models

Frigidaire French Door Refrigerator
Frigidaire Side-by-Side Refrigerator
Frigidaire Top Freezer Refrigerator
Frigidaire Gallery Refrigerator
Frigidaire Professional Refrigerator

Common Causes

Freezer door left open or not sealing properly
Large quantity of warm food added raising the temperature
Power outage allowing temperature to rise
Defrost system failure causing ice build-up on the evaporator
Evaporator fan failed — cold air not circulating
Compressor fault

How to Fix It

Press any control button to acknowledge and silence the alarm.

H1 appears as an alert — press any button on the control panel to acknowledge it. The alarm will remain until the freezer temperature drops back to the set level.
Check that the freezer door is fully closed.

Open and firmly close the freezer door. Check that nothing inside the freezer is preventing the door from sealing. Inspect the door gasket for tears or sections that are not sealing.
Allow the freezer to recover.

After a door left open or a power outage, H1 will clear once the freezer returns to its set temperature. Keep the freezer closed for 2–4 hours. Do not add warm food until H1 clears.
Check for a defrost fault.

If H1 recurs without an obvious cause, remove the rear panel inside the freezer. A solid sheet of ice on the evaporator confirms a defrost failure. Manually defrost by unplugging for 24 hours, then restart.

When to Call a Professional

If H1 persists with the doors closed for 4 hours with no warm food added and no recent power outage, the freezer has a genuine cooling fault — call a Frigidaire-authorised technician.