Boundary Wire Break
Worx Robotic Lawn Mower
Severity: CriticalWhat Does This Error Mean?
A Landroid boundary wire break stops the mower from operating. Walk the full perimeter wire to find the cut, then rejoin using waterproof wire connectors.
How to Fix It
-
Check the base station signal LED
-
Walk the boundary wire
-
Use the AM radio trick
-
Repair the break
-
Re-stake the repaired section
-
Test and restart
Frequently Asked Questions
How do I find a boundary wire break without a detector?
Walk slowly around the perimeter and look for visible cuts. You can also disconnect the wire at the station and use a multimeter in continuity mode to test each wire end.
What connectors should I use to repair the Landroid boundary wire?
Use Worx-branded boundary wire connectors or generic waterproof splice connectors rated for outdoor use. Ensure the connection is tight and weatherproofed.
How deep should the Landroid boundary wire be buried?
Worx recommends laying the boundary wire on the surface or burying it up to 2 cm deep. Too deep can weaken the signal; surface-laid wire is more vulnerable to cuts.