Not Draining
Electrolux Washing Machine
Severity: CriticalWhat Does This Error Mean?
An Electrolux washing machine that will not drain almost always has a clogged pump filter. Open the access panel at the bottom front, unscrew the filter cap, and clear out all lint, coins, and debris.
Affected Models
- Electrolux Front Load Washer
- Electrolux Top Load Washer
- Electrolux EWF Series Washer
- Electrolux PerfectCare Washer
Common Causes
- Blocked pump filter — the most common cause
- Kinked or blocked drain hose
- Drain hose insertion too deep — siphon effect
- Blocked household drain standpipe
- Failed drain pump motor
How to Fix It
-
Clean the pump filter.
Open the front access panel at the bottom of the machine. Place towels and a tray underneath. Unscrew the filter cap slowly and let water drain. Remove the filter and clear all debris. Refit and run a Drain/Spin programme.
-
Check the drain hose.
Inspect the corrugated drain hose at the back. Straighten any kinks. Ensure the hose does not enter the standpipe more than 15 cm — a deeper insertion creates a siphon that prevents drainage.
-
Test the household standpipe.
Pour water into the standpipe to confirm it flows freely. A slow standpipe is a plumbing issue — contact a plumber rather than an appliance technician.
When to Call a Professional
If the filter is clean and the drain hose is clear but the machine still will not drain, the drain pump motor has failed and needs professional replacement.