AquaClean Alert
Philips Saeco Coffee Machine
Severity:What Does This Error Mean?
The AquaClean alert means your AquaClean water filter has reached the end of its service life and needs to be replaced. Fitting a new filter and rinsing it correctly resets the alert automatically.
Affected Models
- Philips 2200 Series
- Philips 3200 Series
- Philips 4300 Series
- Philips 5400 Series
- Saeco GranBaristo
- Saeco Xelsis
- Saeco Minuto
Common Causes
- AquaClean filter has filtered its maximum capacity (approximately 5,000 cups)
- Filter was not activated correctly when first installed
- Filter has been in place too long and needs replacement regardless of cup count
How to Fix It
-
Purchase a new AquaClean filter.
Use a genuine Philips AquaClean filter (CA6903). Third-party filters may not trigger the automatic counter reset and may not fit correctly.
-
Rinse the new filter.
Hold the new filter under cold running water for 15 seconds before installing. This wets the filter media and prepares it for installation.
-
Install the filter in the water tank.
Remove the old filter from the water tank. Insert the new filter into the tank holder, making sure it clicks firmly into place.
-
Confirm the filter installation in the machine menu.
On most Philips models, when you reinsert the water tank after fitting a new filter, the machine will ask if you have installed a new AquaClean filter. Select Yes — this resets the AquaClean counter and clears the alert.
When to Call a Professional
AquaClean filter replacement is a simple user maintenance task. No professional service is needed.