FP
hOmeLabs Dehumidifier
Severity:What Does This Error Mean?
hOmeLabs dehumidifier FP means the frost protection feature has activated because the evaporator coils have iced over, usually due to a cold room. The unit pauses to defrost automatically — this can take 30–60 minutes.
How to Fix It
-
Allow the automatic defrost cycle to complete
-
Check the room temperature
-
Clean the air filter
-
Increase the room temperature
-
Avoid blocking the air intake
Frequently Asked Questions
hOmeLabs dehumidifier FP appearing every 30 minutes — is something wrong?
Frequent FP cycling means the room is too cold for sustained operation. Move the dehumidifier to a warmer room, or accept that FP will continue to interrupt operation until the room warms up.
hOmeLabs dehumidifier FP active for over 2 hours — should I be worried?
A defrost cycle usually completes in 30–60 minutes. If FP has been showing for over 2 hours, unplug the unit and check whether the coils have fully defrosted. If the coils are still iced, the ambient temperature may be too low for the defrost fan to work.
Is FP frost protection the same as EC refrigeration error on hOmeLabs?
No. FP is a normal protective mode that pauses operation while frosted coils defrost — it clears automatically. EC is a hardware fault indicating a refrigeration failure that requires investigation.