Samsung Dishwasher bE Error — Button Stuck Fix Guide

What Does This Error Mean?

bE on a Samsung dishwasher means a button is reading as continuously pressed.
The dishwasher refuses to start because it can't tell what command you want.
Wipe the control panel thoroughly with a damp soft cloth, dry completely, and try again.
Most bE events clear with cleaning.
If bE persists, the button membrane has failed internally and needs replacement.

Affected Models

Samsung DW80
Samsung DW60
Samsung StormWash
Samsung Smart Dishwasher
Samsung Linear Wash

Common Causes

Spilled liquid on the control panel
Food residue trapped under a button
Membrane physically damaged from harsh cleaners
Button stuck mechanically pressed in
Membrane failed internally after years of use

How to Fix It

Power off at the breaker or unplug.

For built-ins, switch the breaker off.
For freestanding models, unplug.
Wait a minute before working on the panel.
You don't want buttons activating while you clean.
Wipe the panel with a damp cloth.

Use a soft cloth slightly damp with water and a tiny bit of mild dish soap.
Wipe the entire panel, paying attention to the edges of each button.
Never spray cleaner directly on the panel — moisture seeping under buttons is what causes bE in the first place.
Press each button individually.

Once the panel is dry, press each button and watch for response.
If one feels mushy, doesn't release, or makes no click, that's the stuck button.
Press it firmly several times to free it.
Sometimes a stuck button frees with repeated activation.
Restore power and test.

Plug back in or restore breaker.
The panel should boot to its normal state.
Try selecting a cycle.
If bE doesn't return, you've fixed it.
If bE reappears, the membrane has failed internally — service required.
Schedule service for membrane replacement.

Most Samsung-authorized centers can replace the panel in one visit.
Parts run 80–200 USD depending on model.
Total bill 200–350 USD with labor.
For older dishwashers (8+ years), weigh against replacement cost.

Frequently Asked Questions

What if water got into the panel?

Sometimes drying out for 24 hours clears the issue temporarily.
The membrane often suffers permanent damage from moisture though — bE may return.
To prevent: never run the panel while wiping the door area; wipe with a damp cloth, not a wet one.

Can I disable a stuck button?

No — the membrane reads as one circuit.
One stuck button means the entire panel reports a short.
The dishwasher won't accept any input until the stuck signal clears.
Either cleaning works, or membrane replacement is needed.