Maytag Dryer F1E1 Error — Control Board Failure

What Does This Error Mean?

F1E1 means the main electronic control board has failed. The dryer cannot run without it. Try unplugging for 5 minutes first — if the code returns, the board must be replaced.

Affected Models

Maytag Electric Dryer
Maytag Gas Dryer
Maytag MED Series
Maytag MGD Series
Maytag Maxima Dryer

Common Causes

Failed main control board
Power surge or voltage spike
Loose or corroded wiring harness connector
Moisture damage to board circuitry

How to Fix It

Reset the dryer.

Unplug from the wall for 5 full minutes, then plug back in. If F1E1 disappears and the dryer runs normally, a temporary voltage spike caused the error.
Inspect wiring harness connections on the control board.

Unplug the dryer and access the control board (behind the back or top panel depending on model). Firmly reseat all wire connectors and look for burnt, corroded, or damaged pins.
Replace the main control board.

If wiring is intact and F1E1 returns after a reset, the board must be replaced. Search your full Maytag model number to find the correct replacement part.

When to Call a Professional

If a reset does not clear F1E1 and wiring connections look intact, the control board has failed. A technician can confirm with diagnostics before you order the part.