E2
Levoit Humidifier
Severity: ModerateWhat Does This Error Mean?
E2 on a Levoit humidifier means the built-in humidity sensor is not reading correctly. Clean the sensor area, ensure the water tank is properly seated, and try a power cycle. Persistent E2 may require a replacement unit under warranty.
Affected Models
- Levoit LV600HH
- Levoit OasisMist 600S
- Levoit Classic 300S
- Levoit Dual 200S
- Levoit LUH-D301S
Common Causes
- Mineral deposits coating the humidity sensor probe
- Moisture or condensation on the sensor causing a false reading
- Humidity sensor component failure
- Water tank not properly seated, disrupting sensor circuit
How to Fix It
-
Power off and unplug the humidifier.
-
Remove the water tank and empty the base.
Pour out any water from the base tray. Moisture sitting near the sensor can cause false readings.
-
Clean the sensor area.
Look inside the base for the humidity sensor — a small probe or vent opening. Gently clean around it with a cotton swab lightly dampened with white vinegar to remove mineral scale. Do not submerge the sensor or use harsh cleaners.
-
Allow the base to dry completely.
Leave the humidifier open and unplugged for 2–3 hours before refilling. Residual moisture on the sensor is a common cause of E2.
-
Reinstall the tank and restart.
Ensure the water tank is clicked firmly into position. Restart and allow a few minutes to see if E2 clears.
Frequently Asked Questions
Is Levoit E2 covered under warranty?
Yes — E2 from a manufacturing defect in the humidity sensor is covered under Levoit's standard warranty (typically 2 years). Contact Levoit support with proof of purchase if cleaning does not resolve it.
Can I use the humidifier without the humidity sensor working?
Most Levoit models require the humidity sensor to function before they will mist. E2 typically prevents operation. Some models have a manual mode that bypasses auto-humidity — check the app or manual for your specific model.