Ad Space — Top Banner

E1

Midea Portable Air Conditioner

Severity: Moderate

Source: OnlyErrorCodes.com — Every error code. One place.

Midea Portable AC E1 Error — Room Sensor

What Does This Error Mean?

E1 on a Midea portable AC means the ambient room temperature sensor has detected an open or short circuit. The unit cannot read room temperature. Cooling may continue with a default value but accuracy is reduced. Sensor replacement clears E1.

Affected Models

  • Midea Duo MAP12HS1TBL
  • Midea EasyCool
  • Midea Quick Connect
  • Midea MAP14HS1TBL
  • Midea Smart MAP08R1BWT

Common Causes

  • Failed ambient room temperature sensor (NTC thermistor)
  • Sensor connector loose at the PCB
  • Sensor wiring damaged or pinched
  • Moisture or dust ingress at the sensor
  • Indoor PCB input fault (rare)

How to Fix It

  1. Power-cycle the unit.

    Switch off at the wall socket for 5 minutes. Restore power. A power-cycle clears soft E1 events from transient sensor reads.

  2. Move to a different outlet.

    Outlet voltage issues can occasionally cause sensor read problems. Try a different room outlet to rule out power-related E1.

  3. Check whether cooling still works.

    Some Midea models continue to cool with a default temperature value when the ambient sensor fails. If the unit produces cool air, you can use it short-term while waiting for repair.

  4. Inspect the air intake.

    The ambient sensor is usually behind the air intake grille. Confirm the grille is not blocked by furniture, curtains, or dust. Restricted airflow can cause sensor reading issues that look like E1.

  5. Book service for sensor replacement.

    Persistent E1 needs sensor replacement. Midea sensors cost USD 15–35 for the part, plus USD 100–150 labour. Total typical USD 120–200 fitted.

Frequently Asked Questions

What is the difference between Midea E1 and E2?

E1 is the room ambient sensor fault. E2 is the indoor coil sensor fault. Both are NTC thermistors at different positions. E1 affects setpoint accuracy; E2 prevents cooling for safety.

Can I keep using my Midea AC with E1?

Most Midea models continue cooling with E1 active using a default room temperature value. The thermostat becomes inaccurate (room may overcool or undercool relative to setpoint). Useful as a short-term workaround.