Keypad Lockout
Honeywell Home Security Alarm
Severity: ModerateWhat Does This Error Mean?
Honeywell Home alarm keypad lockout occurs after several incorrect code entries and prevents further input for a set period (usually 30–60 seconds per attempt). Wait out the lockout period, then enter the correct Master Code to regain access.
How to Fix It
-
Wait for the lockout period to expire
-
Enter the correct Master Code carefully
-
Try the installer code if you are locked out of master code programming
-
Contact your alarm company for master code reset
-
Perform a full panel reset (last resort)
-
Check if the alarm is alerting your monitoring centre
Frequently Asked Questions
Honeywell Home alarm keypad shows DISARMED but will not accept any codes?
If the keypad accepts no codes at all (not just lockout), check the keypad is communicating with the panel. A keypad communication failure prevents code entry. Check the keypad wiring if it is a hardwired keypad.
Honeywell Home alarm lockout lasting more than 5 minutes — is that normal?
Some Honeywell systems have an escalating lockout — each additional wrong attempt extends the lockout period. Wait without pressing any keys for 5 minutes before trying again.
How many wrong code attempts cause a Honeywell alarm keypad lockout?
Typically 5–6 consecutive wrong code entries trigger a lockout. The exact count and lockout duration are configurable in panel programming — check with your installer for your system settings.