E12
Bosch Dishwasher
Severity: ModerateWhat it means
E12 means limescale has built up inside the heat pump, the main wash pump with the water heater built into it.
Scale on the heater gets in the way of heating the water.
You can usually clear this yourself: run a dishwasher descaler through an empty machine.
Then stop it coming back with softener salt and the right hardness setting.
Common Causes
- Hard water in your area
- The softener salt container has run empty
- The water hardness setting is lower than your actual water hardness, so the softener does too little
How to Fix It
-
Run a dishwasher descaler through the empty machine.
Bosch recommends its own descaler.
Follow the directions on the pack. -
If your dishwasher has a salt container, fill it with dishwasher salt.
The container is under the lower rack, next to the filter.
Use coarse dishwasher salt, not table salt. -
Check that the water hardness setting matches your water.
Your water supplier can tell you the hardness.
The manual shows how to change the setting on your model. -
If E12 keeps coming back after descaling, contact Bosch service.