E04, E09, E20
Bosch Dishwasher
Severity: CriticalWhat it means
These codes are about the heater that warms the wash water.
On Bosch dishwashers the heater is built into the main wash pump, and Bosch calls the whole unit the heat pump.
E09 and E20 mean the heater inside it has a fault.
E04 means the dishwasher's own self-test found faulty heater electronics.
Try one power reset; if the code returns, book a technician.
Common Causes
- A failed heater inside the heat pump (E09, E20)
- Faulty heater electronics, found when the dishwasher tests itself (E04)
- A loose or damaged connection between the control board and the heat pump
How to Fix It
-
Switch the dishwasher off at the breaker for 30 seconds, then on again.
That is Bosch's first step for E09 and E20.
-
Run a program and see whether the code returns.
Before the code showed up, you may have noticed dishes coming out cool or poorly dried, because the water was not heating.
-
If the code comes back, contact Bosch service.
Because the heater is part of the pump, the repair usually means replacing the heat pump unit.
Have the model number ready from the label on the edge of the door.
Frequently Asked Questions
Is the heat pump the same as the heat pump in a heat pump dryer?
No.
In a Bosch dishwasher, heat pump is simply the name of the main wash pump with a heating element built in.
It warms the water as it pumps it.
It has nothing to do with the refrigeration-style heat pump in some dryers.