E12
Bosch Dryer
Severity: ModerateWhat it means
E12 means the dryer got too hot because air is not flowing through it properly.
Hot, damp air has to leave through the lint screen, the duct and the vent outside your home.
A blockage anywhere along that path makes heat build up until the dryer stops.
Clean the screen, clear the duct, and check the outside vent flap.
Affected Models
- Bosch vented dryers (the models with a duct that leads outside)
Common Causes
- A clogged lint screen
- A duct that is crushed, kinked or packed with lint
- The outside vent flap stuck shut, or blocked by a nest, leaves or snow
How to Fix It
-
Stop the dryer and let it cool down.
Do not keep restarting it while E12 is showing.
Each restart heats a dryer that cannot get rid of the heat. -
Clean the lint screen.
Wash it in warm soapy water if it is coated, then let it dry fully.
-
Unplug the dryer, pull it forward and check the duct behind it.
Straighten any kinks.
Disconnect the duct and clear out the lint inside. -
Go outside and check where the duct leaves the building.
The flap should open freely when the dryer runs, and nothing should be in front of it.
-
Reconnect everything and run a short test cycle.
Frequently Asked Questions
One Bosch page says E12 means limescale. Which is right?
For dryers, Bosch's own E12 guide describes overheating from restricted airflow, and its fix steps are all about the lint screen and the vent.
Limescale build-up is what E12 means on Bosch dishwashers.