tE2

LG Dryer

Severity: Minor

What it means

tE2 means the dryer detected a problem with its thermistor (temperature sensor), normally in cold conditions.
LG says it usually happens when cold outside air comes back into the dryer through an open exhaust vent.
It can appear during SteamFresh, Steam Sanitary or a Steam option, because the duct cools down too quickly.

Common Causes

  • A flap on the outside vent stuck open, so cold air blows back into the dryer
  • Snow, ice or frost on the outside vent or the roof vent
  • A clogged lint filter or vent

How to Fix It

  1. Outside: check that the flaps on the exhaust vent open and close properly.

    Look for snow, frost or lint that keeps them open. Roof and wall vents should not be covered in snow or frozen shut.

  2. Clean the lint filter, and check the vent for lint or other blockages.

  3. Warm the dryer up: run it empty on a different cycle for a few minutes.

    LG gives a second way: select SteamFresh, press More Time until the Big or Bulky option is selected, and start the cycle.

  4. If tE2 comes back after a reset, request LG service.

    To reset, cut the power, hold Start/Pause for 5 seconds while it is off, then restore power.