8C, 8E, BC, BE, 8E1, 8C1, 8C2
Samsung Washer
Severity: ModerateWhat it means
Samsung calls this the MEMS sensor error.
The MEMS sensor is a vibration sensor: it tells the control board when the drum is out of balance.
When it stops working properly, the washer shows one of Samsung's codes for it: 8C, 8E, BC, BE, or a numbered one such as 8E1 or 8C1.
Samsung's advice is a restart, then service if the code returns.
How to Fix It
-
Switch the washer off and wait 2 to 3 minutes.
-
Switch it on and restart the cycle.
-
If the code comes back, request Samsung service.
Frequently Asked Questions
My washer shows 8E2 or BE2. Is that this error?
It depends on the model.
Samsung says BE2 (8E2) is a MEMS sensor error on some washers and a stuck button on others.
Your manual says which one yours uses.
Is 8E always the MEMS sensor?
Not everywhere.
Samsung's UK and Ireland lists call 8E a current error, the Lebanon list an overcurrent error, and the Russian list a vibration sensor fault.
The steps are the same: restart, and get service if it comes back.