bE1, bE2, bE3, 6E2, 12E, 14E

Samsung Washer

Severity: Minor

What it means

Samsung calls these button errors: the washer thinks a button on the control panel is stuck, or is being pressed all the time.
A button may simply have caught on the edge of its opening.
12E and 14E are the older codes for the same thing.
Samsung's fix is to free each button by hand, and to call service if one is damaged.

Common Causes

  • A button caught on the edge of the panel
  • Dirt or detergent residue around a button
  • Something pressing on the panel, such as a basket or a box
  • A damaged button or control panel

How to Fix It

  1. Switch the washer off.

  2. Press each button one at a time, working it back and forth so you reach all its edges before you let go.

  3. Wipe the panel with a damp cloth.

    Samsung's UK page suggests this for sticky buttons.

  4. Switch the washer on.

    If a button is damaged, or the code comes back, request Samsung service.

Frequently Asked Questions

Is E2 a stuck button too?

Only on some models.
Samsung's US list puts E2 with bE2 and 6E2 as a stuck button.
Its UK, Ireland, Australia, Russia and Philippines lists give E2 as a drain error instead.
If no button is stuck and water is left in the drum, follow the 5C drain steps.

My washer shows BE2 or 8E2. Is that this error?

It depends on the model.
Samsung says BE2 (8E2) is a stuck button on some washers and a MEMS sensor error on others.
Your manual says which one yours uses.