E03

Bosch Dryer

Severity: Minor

What it means

E03 means water cannot get out through the condensation drain hose.
It comes up on dryers that pump their condensed water to a drain, instead of collecting it in a container.
Usually the hose is kinked behind the machine, or lint and residue have blocked it.
Straighten it, clean it, and the code clears.

Affected Models

  • Bosch condenser and heat pump dryers with the drain hose connected to a household drain

Common Causes

  • The hose got kinked or squashed when the dryer was pushed back against the wall
  • Lint and residue built up inside the hose
  • A blocked connection where the hose joins the drain or sink siphon

How to Fix It

  1. Unplug the dryer and pull it far enough forward to reach the back.

  2. Follow the drain hose from the dryer to the drain and straighten any kinks.

    Look closely where the hose drops behind the machine: that is where it gets bent when the dryer is pushed back.

  3. Disconnect the hose and clear it with a long, flexible brush.

    If it runs into a sink siphon, loosen the hose clip there, ease the hose off and clean the siphon spigot too.
    Have a towel ready: some water will come out.

  4. Reconnect the hose, route it without kinks, and run a short test cycle.

    When you push the dryer back, leave enough room behind it for the hose to curve gently.